MLG2-0440A812 Datasheet, PDF (5/7 Pages) SICK AG – MEASURING AUTOMATION LIGHT GRIDS

Adjustments
LED indicator
NC
15
26
7
38
49
blinks with 3 Hz
on
out
on or out
① Supply voltage
② Device error
③ No object in the light path
④ Contamination control
⑤ Blocked Beams Hold (BBH)
⑥ Activated teach-in procedure
⑦ ParamMode is active
⑧ Standby
⑨ Error: E1 = sync. error; E2 = less receiver signal; E9 = defect
MLG2-0440A812 | MLG
MEASURING AUTOMATION LIGHT GRIDS
Recommended accessories
Other models and accessories www.sick.de/MLG
Brief description
Mounting brackets and mounting plates
Side mounting with T-nuts, 4 pieces, mounting hardware included
Type
BEF-NUT-MLG
Part no.
2023696
Metal mounting bracket, compact, steel, zinc coated, Set, consisting of 4 pieces, without
mounting hardware
BEF-WK-XLG
Terminal and alignment brackets
4 pieces, Mounting kit 1, rotatable, swivel mount, plastic
BEF-2SMKEAKU4
2029100
2019649
Adapters and distributors
Male connector M12, 8-pin, straight, to 1 x female connector M12, 8-pin, straight and
1 x female connector M12, 8-pin, straight
Plug connectors and cables
SBO-02F12-SM
6029306
2016-01-29 09:44:08 | Online data sheet
S ubject to change without notice
AUTOMATION LIGHT GRIDS | SICK
5