WSE4S-3P5230H Datasheet, PDF (3/5 Pages) SICK AG – Through-beam photoelectric sensor

Ripple:
Power consumption:
< 5 Vpp
2)
≤ 20 mA
Output type:
PNP
Output function:
Complementary
Switching mode:
Light/dark switching
Output current Imax.:
Response time:
Switching frequency:
Connection type::
≤ 100 mA
< 0.5 ms ³⁾
4)
± 1,000 Hz
Cable with M8 male connector, 4-pin, 150 mm ^{5) 6)}
Cable material:
PVC
Circuit protection:::
A
B
C
7)
8)
9)
Protection class:
III
Weight:
140 g
Housing material:
Stainless steel, Stainless steel 316L
Enclosure rating:
IP 66
IP 67
IP 68
IP 69K
Special feature:
D12 adapter shaft
Test input sender off:
Ambient operating temperature:
TE to 0 V
-30 °C ... 60 °C, -30 °C ... 70 °C ¹⁰⁾
Ambient storage temperature:
-30 °C ... 75 °C
Part number of individual components:
Receiver, WE4S-3P5230H, 2061077, Sender, WS4S-3D5230H, 2061055
Mechanical connection:
D12 adapter shaft
1)
2)
3)
4)
Limit values, reverse-polarity protected, operation in short-circuit protected network: max. 8 A Sender Signal transit time with resistive load With light/dark
5)
6)
7)
8)
ratio 1:1 Tightening torque, max.: 0.6 Nm Do not bend below 0 °C A = V connections reverse-polarity protected B = inputs and output reverse-polarity
9)
10)
S
protected C = interference suppression At UV ≤ 24 V and IA < 30 mA
Photoelectric sensorsAAAAAAAAAAAAA© SICK AG. Subject to change without notice.AAAAAAAAAAAAA2/4/2016 2:07:03 AM