WLG4S-3F3434V Datasheet, PDF (3/7 Pages) SICK AG – Photoelectric retro-reflective sensor

Mechanics/electronics
Supply voltage:
Ripple:
Power consumption:
1)
10 V DC ... 30 V DC
< 5 Vpp ²⁾
3)
≤ 30 mA
Output type:
PNP
Switching mode:
Dark switching
Output current Imax.:
Response time:
Switching frequency:
Connection type:
≤ 100 mA
4)
< 0.5 ms
1,000 Hz ⁵⁾
6)
Cable with connector M12, 4-pin, 150 mm
Cable material:
PVC
Circuit protection:::
A
B _{7) 8) 9)}
C
Protection class:
III
Weight:
60 g
Polarisation filter:
ü
Housing material:
Stainless steel, Stainless steel 316L
Enclosure rating:
IP 66
IP 67
IP 68
IP 69K
Special feature:
Ambient operating temperature:
For transparent objects
10)
-30 °C ... 60 °C, -30 °C ... 70 °C
Ambient storage temperature:
-30 °C ... 75 °C
UL File No.:
NRKH.E181493 & NRKH7.E181493
1)
2)
3)
4)
Limit values, reverse-polarity protected, operation in short-circuit protected network, max. 8 A May not exceed or fall short of V tolerances Without load
5)
6)
7)
S
8)
Signal transit time with resistive load With light/dark ratio 1:1 Do not bend below 0 °C A = V connections reverse-polarity protected B = inputs and output
9)
10)
S
reverse-polarity protected C = interference suppression At UV ≤ 24 V and IA < 30 mA
Photoelectric sensorsAAAAAAAAAAAAA© SICK AG. Subject to change without notice.AAAAAAAAAAAAA2/4/2016 1:54:37 AM