WL8-P2131 Datasheet, PDF (3/7 Pages) SICK AG – Photoelectric retro-reflective sensor

Supply voltage:
Ripple:
Power consumption:
10 V DC ... 30 V DC ¹⁾
2)
± 10 %
≤ 30 mA ³⁾
Output type:
PNP
Switching mode:
Light/dark switching
Output characteristic:
Open collector
Switching mode selector:
Manually selectable
Signal voltage PNP HIGH ∕ LOW:
Approx. VS - 1.8 V ∕ 0 V
Output current Imax.:
Response time:
Switching frequency:
100
4)
≤ 25 ms
2,000 ⁵⁾
Connection type:
Circuit protection:::
Connector M8, 3-pin
A, B, D ^{6) 7) 8)}
Weight:
10 g
Polarisation filter:
ü
Housing material:
ABS, Plastic
Optics material:
PMMA
Enclosure rating:
IP 67
Items supplied:
Stainless steel mounting bracket (1.4301/304) BEF-W100-A, Reflector
P250
Ambient temperature operation:
-25 °C ... 55 °C
Ambient storage temperature:
-40 °C ... 70 °C
1)
2)
3)
4)
Limit values, operation in short-circuit protected network max. 8 A May not exceed or fall short of V tolerances Without load Signal transit time with resistive
5)
6)
7)
S
8)
load With light/dark ratio 1:1 A = V connections reverse-polarity protected B = inputs and output reverse-polarity protected D = outputs overcurrent and
S
short-circuit protected
Photoelectric sensorsAAAAAAAAAAAAA© SICK AG. Subject to change without notice.AAAAAAAAAAAAA2/11/2016 3:18:11 AM