WL2SG-2F3235 Datasheet, PDF (3/7 Pages) SICK AG – Photoelectric retro-reflective sensor

Mechanics/electronics
Supply voltage:
Ripple:
Current consumption:
1)
10 V DC ... 30 V DC
≤ 5 Vpp ²⁾
3)
≤ 20 mA
Output type:
PNP
Switching mode:
Dark switching
Output current Imax.:
Response time:
Switching frequency:
Connection type:
< 50 mA
4)
< 0.5 ms
1,000 Hz ⁵⁾
6)
Cable with M8 male connector, 4-pin, 200 mm
Cable material:
PVC
Cable diameter:
Circuit protection:::
Ø 3 mm
A, B, D ^{7) 8) 9)}
Polarisation filter:
ü
IO-Link:
-
Special device:
-
Optics material:
PMMA
Enclosure rating:
IP 67
Special feature:
Detecting transparent objects
Ambient operating temperature:
-20 °C ... +50 °C
Ambient storage temperature:
-40 °C ... +75 °C
UL File No.:
NRKH.E181493
Housing material:
ABS/PC, Plastic
1)
2)
3)
4)
5)
6)
Limit values May not exceed or fall below U tolerances Without load Signal transit time with resistive load With light/dark ratio 1:1 Do not bend below
7)
v ₈₎
9)
0 °C A = V connections reverse-polarity protected B = output reverse-polarity protected D = outputs overcurrent and short-circuit protected
S
Photoelectric sensorsAAAAAAAAAAAAA© SICK AG. Subject to change without notice.AAAAAAAAAAAAA2/2/2016 1:49:07 AM