TBS-1CSGT2506NM Datasheet, PDF (3/5 Pages) SICK AG – TEMPERATURE SENSORS

TBS-1CSGT2506NM | TBS
TEMPERATURE SENSORS
Response time t₉₀
≤ 10 s ²⁾
1) _{|t| is the absolute value of the temperature in °C.}
2) _{Depending on sensor configuration, according to IEC 60751.}
Mechanics/electronics
Process connection
Thread G ½ A according to DIN 3852-E
Insertion length/diameter of probe
250 mm / 6 mm
Seal
NBR
Wetted parts
Stainless steel 1.4571 (AISI 316Ti)
Maximum process pressure
≤ 150 bar ¹⁾
Housing material
Lower body: stainless steel 1.4301 (AISI 304)
Plastic head: PC + ABS
Input keypad: TPE-E
Display window: PC
Enclosure rating
IP65 (according to IEC 60529) ²⁾
IP67 (according to IEC 60529) ²⁾
Electrical connection
M12 round connector x 1, 4-pin
Maximum ohmic load R_A
≤ 100 kΩ (Switching outputs)
> 10 kΩ (output signal 0 V ... 10 V)
Supply voltage
15 V DC ... 35 V DC
Maximum current consumption
70 mA
Total current consumption
570 mA (incl. switching current)
320 mA
Protection class
III
Insolation voltage
500 V DC
Overvoltage protection
40 V DC
Short-circuit protection
Outputs Q_A, Q₁, Q₂ towards M
Reverse polarity protection
L⁺ towards M
Electrical safety
Protection class III
Insolation voltage 500 V DC
Overvoltage protection 40 V DC
Short-circuit protection Outputs Q_A, Q₁, Q₂ towards M
Reverse polarity protection _L⁺ _{towards M}
CE-conformity
2004/108/EC, EN 61326-1 emission (group 1, class B) and interference immunity (industrial
application)
RoHS certificate
✔
1) _{At room temperature and when connected through thread.}
2) _{The enclosure rating classes specified only apply while the thermometer is connected with female connectors that provide the corresponding enclosure rating.}
Ambient data
Ambient temperature
Storage and transport temperature
Relative humidity
–20 °C ... +80 °C
–20 °C ... +80 °C
45 % ... 75 %
2017-03-14 16:25:09 | Online data sheet
S ubject to change without notice
FLUID SENSORS | SICK
3