SFS60-HRBT3K02 Datasheet, PDF (3/6 Pages) SICK AG – MOTOR FEEDBACK SYSTEMS ROTARY HIPERFACE

SFS60-HRBT3K02 | SFS/SFM60
MOTOR FEEDBACK SYSTEMS ROTARY HIPERFACE®
Flange type/stator coupling
Dimensions
Weight
Moment of inertia of the rotor
Operating speed
Angular acceleration
Operating torque
Start up torque
Permissible shaft movement, radial stat-
ic/dynamic
Permissible shaft movement, axial stat-
ic/dynamic
Life of ball bearings
Connection type
Stator coupling
See dimensional drawing
≤ 0.25 kg
40 gcm²
≤ 9,000 min⁻¹ ¹⁾
≤ 500,000 rad/s²
0.6 Ncm (+20 °C)
0.8 Ncm (+20 °C)
± 0.3 mm / ± 0.1 mm
± 0.5 mm / ± 0.2 mm
3.6 x 10^9 revolutions
Male connector M12, 8-pin, radial
1) _{Take into account self-heating of 3.3 K per 1,000 rpm when designing the operating temperature range.}
Ambient data
Operating temperature range
–40 °C ... +115 °C
Storage temperature range
–40 °C ... +115 °C, without package
Relative humidity/condensation
90 %, Condensation not permitted
Resistance to shocks
100 g, 6 ms (according to EN 60068-2-27)
Frequency range of resistance to vibrations 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
EMC
According to EN 61000-6-2 and EN 61000-6-3 ¹⁾
Enclosure rating
IP65, with mating connector inserted (according to IEC 60529)
1) _{The EMC according to the standards quoted is achieved when the motor feedback system is mounted in an electrically conductive housing, which is connected to}
the central earthing point of the motor controller via a cable screen. The GND (0V) connection of the supply voltage is also grounded here. If other screening concepts
are used, users must perform their own tests.
Classifications
ECl@ss 5.0
ECl@ss 5.1.4
ECl@ss 6.0
ECl@ss 6.2
ECl@ss 7.0
ECl@ss 8.0
ECl@ss 8.1
ECl@ss 9.0
ETIM 5.0
ETIM 6.0
UNSPSC 16.0901
27270590
27270590
27270590
27270590
27270590
27270590
27270590
27270590
EC001486
EC001486
41112113
2017-06-28 22:15:12 | Online data sheet
S ubject to change without notice
MOTOR FEEDBACK SYSTEMS | SICK
3