SEK37-HFB0-K02 Datasheet, PDF (3/7 Pages) SICK AG – MOTOR FEEDBACK SYSTEMS ROTARY HIPERFACE

SEK37-HFB0-K02 | SEK/SEL37
MOTOR FEEDBACK SYSTEMS ROTARY HIPERFACE®
Permissible radial shaft movement
Permissible axial shaft movement
Connection type
± 0.15 mm
± 0.3 mm
Male connector M12, 8-pin, radial
Ambient data
Operating temperature range
–40 °C ... +115 °C
Storage temperature range
–50 °C ... +125 °C, without package
Relative humidity/condensation
90 %, Condensation not permitted
Resistance to shocks
100 g, 10 ms, 10 ms (according to EN 60068-2-27)
Frequency range of resistance to vibrations 50 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
EMC
According to EN 61000-6-2 and EN 61000-6-3 ¹⁾
Enclosure rating
IP20, built-on version, with mating connector inserted and closed cover (according to
IEC 60529)
1) _{The EMC according to the standards quoted is achieved when the motor feedback system is mounted in an electrically conductive housing, which is connected to}
the central earthing point of the motor controller via a cable screen. If other screening concepts are used, users must perform their own tests.
Classifications
ECl@ss 5.0
27270590
ECl@ss 5.1.4
27270590
ECl@ss 6.0
27270590
ECl@ss 6.2
27270590
ECl@ss 7.0
27270590
ECl@ss 8.0
27270590
ECl@ss 8.1
27270590
ECl@ss 9.0
27270590
ETIM 5.0
EC001486
ETIM 6.0
EC001486
UNSPSC 16.0901
41112113
Dimensional drawing (Dimensions in mm (inch))
General tolerances according to DIN ISO 2768-mk
5
max. 17.5
(0.20)
(0.69)
A
3
(0.12)
torx T10
8
(0.31)
44 (1.73)
38^±0.2 (1.50)
1:3
0.7
(0.03)
7.1
(0.28)
2017-05-10 11:53:11 | Online data sheet
S ubject to change without notice
lense screw 2 x M3 x 12
with torx head T10, thread tapped
in the style of DIN 7500
MOTOR FEEDBACK SYSTEMS | SICK
3