PRO2-P100B25A1 Datasheet, PDF (3/7 Pages) SICK AG – DISPLACEMENT MEASUREMENT SENSORS

PRO2-P100B25A1 | Profiler™
DISPLACEMENT MEASUREMENT SENSORS
Data interface
External input
RS-485 ³⁾
Selectable from bank, trigger, hold, reset, laser off and offset
1) _{24 mA for measuring out of range.}
2) _{Maximum current output 100 mA.}
3) _{Half-duplex (9.6 kbit/s ... 4 Mbit/s)}
Mechanics/electronics
Supply voltage V_s
Power consumption
Warm-up time
Housing material
Connection type
Indication
Weight
Dimensions
DC 12 V (–5 %) ... DC 24 V (+10 %) ¹⁾
≤ 180 mA
≤ 30 min
Die-cast zinc
Polycarbonat
Female connector, HRS, 12-pin (I/O, power supply)
2 LEDs (operational status, Laser on/off)
Dot matrix display
Approx. 300 g
40 mm x 60 mm x 94.5 mm
1) _{When using analog voltage output reduced to 18 V DC (–5%) ... 24 V DC (+10%)}
Ambient data
Enclosure rating
Protection class
Ambient temperature
Max. rel. humidity (not condensing)
Temperature drift
Typ. Ambient light immunity
Vibration resistance
Shock resistance
IP 67
III
Operation: –10 °C ... +40 °C
Storage: –20 °C ... +60 °C
85 %
± 0.05 % FS/K (FS = Full Scale = Measuring range of sensor)
Artificial light: ≤ 3,000 lx
Sunlight: ≤ 10,000 lx
10 Hz ... 55 Hz (amplitude 1.5 mm, x-, y-, z-axis 2 hours each)
50 G (x, y, z axis 3 times each)
2016-03-17 13:18:11 | Online data sheet
S ubject to change without notice
DISTANCE SENSORS | SICK
3