PBT-RP025SG1SSNAMA0Z Datasheet, PDF (3/7 Pages) SICK AG – PRESSURE SENSORS

PBT-RP025SG1SSNAMA0Z | PBT
PRESSURE SENSORS
Electrical connection
Supply voltage
Power consumption
Electrical safety
Insolation voltage
CE-conformity
Weight sensor
Seal
Enclosure rating
Protection class III
Reference conditions
Round connector M12 x 1, 4-pin, IP 67
8 V DC ... 35 V DC with output signal 4 mA ... 20 mA and 0 V ... 5 V, 14 V DC ... 35 V DC with
output signal 0 V ... 10 V ¹⁾
Signal current (max. 25 mA) for current output
Max. 8 mA for voltage output signal
Overvoltage protection: 32 V DC, 36 V DC with 4 mA ... 20 mA
Short-circuit protection: Q_A towards M
Reverse polarity protection: L⁺ to M
Protection class: III
500 V DC
Pressure equipment directive: 97/23/EC, EMC directive: 2004/108/EC, EN 61 326-2-3
Approx. 80 g
NBR
IP 67
✔
Reference conditions: According to IEC 61298-1
1) _{The pressure transmitter must be supplied with power by a limited energy circuit compliant with 9.3 of UL/EN/IEC 601010-1 or LPS to UL/EN/IEC 60950-1 or Class}
2 to UL 1310/UL1585 (NEC or CEC). The power supply must be suitable for operation above 2,000 m if the pressure transmitter is used above this altitude.
Ambient data
Ambient temperature
Storage temperature
Relative humidity
Shock load
Vibration load
Classifications
0 °C ... +80 °C
–20 °C ... +80 °C
45 % ... 75 %
500 g according to IEC 60068-2-27 (mechanical shock)
10 g according to IEC 60068-2-6 (vibration under resonance)
20 g optional
ECl@ss 5.0
ECl@ss 5.1.4
ECl@ss 6.0
ECl@ss 6.2
ECl@ss 7.0
ECl@ss 8.0
ECl@ss 8.1
ECl@ss 9.0
ETIM 5.0
ETIM 6.0
UNSPSC 16.0901
27200614
27200614
27200614
27200614
27200614
27200614
27200614
27200614
EC002476
EC002476
41112410
2017-01-16 15:56:27 | Online data sheet
S ubject to change without notice
FLUID SENSORS | SICK
3