PBS-RB010SGESSCBMA0Z Datasheet, PDF (3/6 Pages) SICK AG – PRESSURE SENSORS

Internal transmission fluid
Pressure port
Housing material
Electrical connection
Supply voltage
Power consumption
Total current consumption
Electrical safety
Insolation voltage
CE-conformity
Weight sensor
Seal
Enclosure rating
Protection class III
Ambient data
Ambient temperature
Storage temperature
Relative humidity
Shock load
Vibration load
PBS-RB010SGESSCBMA0Z | PBS
PRESSURE SENSORS
Silicone oil (only with pressure ranges < 0 bar ... 10 bar and ≤ 0 bar abs ... 25 bar abs)
Standard
Lower body: stainless steel 304, Plastic head: PC + ABS, Buttons: TPE-E, Display window: PC
Round connector M12 x 1, 4-pin, IP 67
15 V DC ... 35 V DC
45 mA (for configurations without analog output signal)
70 mA (for configurations with analog output signal)
Max. 350 mA / 570 mA (incl. switching current)
Protection class: III
Overvoltage protection: 40 V DC
Short-circuit protection: Q_A, Q₁, Q₂ towards M
Reverse polarity protection: L⁺ to M
500 V DC
Pressure equipment directive: This instrument is a pressure accessory as defined by the direc-
tive 97/23/EC, EMC directive: 2004/108/EC, EN 61326-2-3
Approx. 200 g
Copper
IP 67
✔
–20 °C ... +80 °C
–20 °C ... +80 °C
≤ 90 %
50 g according to IEC 60068-2-27 (mechanical shock)
10 g according to IEC 60068-2-6 (vibration under resonance)
Dimensional drawing (Dimensions in mm (inch))
G ½ B according to EN 837
27
(1.06)
G1/2B
EN837
2016-03-19 00:51:29 | Online data sheet
S ubject to change without notice
FLUID SENSORS | SICK
3