GTE10-R3811 Datasheet, PDF (3/7 Pages) SICK AG – Photoelectric proximity sensor

Output type:
Relay, SPDT, electrically isolated ³⁾
Response time:
Connection type:
≤ 10 ms
Cable, 5-wire, 2 m ⁴⁾
Cable material:
PVC
Conductor cross-section:
Circuit protection:
Protection class:
0.25 mm²
5)
C
II ⁶⁾
Weight:
115 g
Polarisation filter:
Interference emission:
-
7)
EN 61000-6-3 (2011-09)
Special device:
-
Enclosure rating:
IP 67
Usage category:
AC-15, DC-13, According to EN 60947-1
EMC:
Ambient operating temperature:
EN 60947-5-2
-30 °C ... +60 °C ⁸⁾
Ambient storage temperature:
-40 °C ... +70 °C
UL File No.:
Further standards:
Switching frequency max.:
NRKH.E348498 & NRKH7.E348498
9)
UL325
20 Hz ¹⁰⁾
Switching load max. (current/voltage):
0.11 A (250 V DC), 3 A (250 V AC), 3 A (30 V DC)
Relay switching cycles min.:
100.000 cycles (3 A)
Housing material:
PVC ∕ PMMA, Plastic
1)
2)
3)
4)
5)
+- 10 % May not exceed or fall below U tolerances Provide suitable spark suppression for inductive or capacitive loads Do not bend below 0 °C C =
6)
v
7)
interference suppression Reference voltage: 250 V AC In the case of a DC supply (ref. to EN 61000-6-3) the length of cable between the supply source and the
8)
9)
10)
sensor must be < 30 m UL: 0 °C ... +60 °C Complies with the UL325 standard when used with sturdy protection hood (e.g. BEF-G10WSG, 2071960). With
light/dark ratio 1:1
Photoelectric sensorsAAAAAAAAAAAAA© SICK AG. Subject to change without notice.AAAAAAAAAAAAA2/18/2016 2:23:54 AM