GSE10-P4112 Datasheet, PDF (3/7 Pages) SICK AG – Through-beam photoelectric sensor

Switching mode:
Light/dark switching
Switching mode selector:
Selectable via light/dark selector
Output current Imax.:
Response time:
≤ 100 mA
3)
≤ 500 µs
Connection type:
Circuit protection::::
M12, 4-pin male connector
4) 5) 6) 7)
A, B, C, D
Protection class:
III
Weight:
70 g
Polarisation filter:
-
Special device:
-
Enclosure rating:
IP 67
Items supplied:
Mounting bracket BEF-G10DC01 (2x)
EMC:
EN 60947-5-2
Test input:
-
Ambient operating temperature:
-30 °C ... +60 °C
Ambient storage temperature:
-40 °C ... +70 °C
UL File No.:
Further standards:
Switching frequency max.:
NRKH.E348498 & NRKH7.E348498
8)
UL325
1,000 Hz ⁹⁾
Housing material:
PVC ∕ PMMA, Plastic
1)
2)
3)
4)
Limit values when operated in short-circuit protected network: max. 8 A May not exceed or fall below U tolerances Signal transit time with resistive load A =
5)
6)
v
7)
V connections reverse-polarity protected B = inputs and output reverse-polarity protected C = interference suppression D = outputs overcurrent and short-
S
8)
9)
circuit protected Complies with the UL325 standard when used with sturdy protection hood (e.g. BEF-G10WSG, 2071960). With light/dark ratio 1:1
Dimensional drawing
Photoelectric sensorsAAAAAAAAAAAAA© SICK AG. Subject to change without notice.AAAAAAAAAAAAA2/18/2016 2:10:48 AM