WSE250-2N2431 Datasheet, PDF (2/7 Pages) SICK AG – Through-beam photoelectric sensor

Photoelectric sensors
W250-2, Through-beam photoelectric sensor
Type
Part No.
> WSE250-2N2431
> 6044711
At a glance
• Very high sensing range in compact housing
• Versions for 10 - 30 V DC or 24 - 240 V DC/ 24 – 240 V AC voltage supply in
compact design
• Mounting bracket included in delivery
• Potentiometer with an easy-to-read positioning indicator for adjusting the sensing
range
• Operating mode (light/dark) selectable via control wire
• Cable or rotatable M12 connector
Your benefits
• Universal AC/DC voltage variants provide high performance and increased
flexibility in environments with limited space
• High performance reserve in harsh environmental conditions
• Mounting kit reduces installation time
• Operating mode (light/dark) is selectable via a control cable to reduce the number
of device variants
• Mounting compatibility - DC devices and AC/DC devices available in same design
Illustration may differ
Features
Sensor/detection principle:
Dimensions (W x H x D):
Housing design (light emission):
Sensing range max.:
Sensing range:
Type of light:
Light source:
Angle of dispersion:
Adjustment:
Through-beam photoelectric sensor
20 mm x 65 mm x 43.9 mm
Rectangular
0 m ... 50 m
0 m ... 40 m
Visible red light
1)
BrightLight LED
Ca. 2 °
P₂₎otentiometer, 2 turns
Light spot size (distance):
Ø 0.6 m (20 m)
1)
2)
Average service life of 100,000 h at T = +25 °C With position indicator
A
Mechanics/electronics
Supply voltage:
Ripple:
Power consumption, sender:
10 V DC ... 30 V DC ¹⁾
2)
≤ 5 Vpp
20 mA ³⁾
Photoelectric sensorsAAAAAAAAAAAAA© SICK AG. Subject to change without notice.AAAAAAAAAAAAA3/15/2016 1:46:01 AM