WL100-2P4429 Datasheet, PDF (2/7 Pages) SICK AG – Photoelectric retro-reflective sensor

Photoelectric sensors
W100-2, Photoelectric retro-reflective sensor
Type
Part No.
> WL100-2P4429
> 6052386
At a glance
• Standard miniature housing with integrated M3 threaded mounting holes
• Bright emitted light spot and clearly visible indicator LEDs
• Light/dark switching and sensitivity adjustment possible
• Low switching hysteresis for detecting transparent objects with min. 20%
attenuation in the light path
Your benefits
• Reliable detection with regard to transparent objects with attenuation in the light
path of min. 20%
• Straightforward alignment thanks to bright light spot and clearly visible indicator
LEDs
• Compatibility with a number of common mounting systems due to standard
housing with 1-inch hole spacing and integrated M3 threaded mounting hole
• Highly reliable and durable despite optical interference and mechanical loads
Illustration may differ
Features
Sensor/detection principle:
Dimensions (W x H x D):
Housing design (light emission):
Sensing range max.:
Sensing range:
Type of light:
Light source:
Wave length:
Special features:
Adjustment:
Light spot size (distance):
1) 2)
3)
PL80A Average service life of 100,000 h at T = +25 °C
A
Photoelectric retro-reflective sensor
11 mm x 31 mm x 20 mm
Rectangular
1)
0.01 m ... 3 m
0.01 m ... 2.5 m ²⁾
Visible red light
LED ³⁾
632 nm
Detecting transparent objects
Potentiometer
Ø 140 mm (2 m)
Mechanics/electronics
Supply voltage:
Ripple:
Current consumption:
Output type:
Switching mode:
Switching mode selector:
10 V DC ... 30 V DC ¹⁾
2)
± 10 %
≤ 30 mA ³⁾
PNP
Light/dark switching
Selectable via light/dark rotary switch
Photoelectric sensorsAAAAAAAAAAAAA© SICK AG. Subject to change without notice.AAAAAAAAAAAAA2/15/2016 2:33:08 AM