WL100-2P3439 Datasheet, PDF (2/7 Pages) SICK AG – Photoelectric retro-reflective sensor

Photoelectric sensors
W100-2, Photoelectric retro-reflective sensor
Type
Part No.
> WL100-2P3439
> 6052361
At a glance
• Standard miniature housing with integrated M3 threaded mounting holes
• Bright emitted light spot and clearly visible indicator LEDs
• Light/dark switching and sensitivity adjustment possible
• Long sensing ranges of up to 7.2 m on PL80A reflector
Your benefits
• Long sensing ranges of up to 7.2 m thanks to a high functional reserve
• Straightforward alignment thanks to bright light spot and clearly visible indicator
LEDs
• Compatibility with a number of common mounting systems due to standard
housing with 1-inch hole spacing and integrated M3 threaded mounting hole
• Highly reliable and durable despite optical interference and mechanical loads
Illustration may differ
Features
Sensor/detection principle:
Dimensions (W x H x D):
Housing design (light emission):
Sensing range max.:
Sensing range:
Type of light:
Light source:
Wave length:
Adjustment:
Light spot size (distance):
1) 2)
3)
PL80A Average service life of 100,000 h at T = +25 °C
A
Photoelectric retro-reflective sensor
11 mm x 31 mm x 20 mm
Rectangular
1)
0.01 m ... 7.2 m
0.01 m ... 5.5 m ²⁾
Visible red light
LED ³⁾
632 nm
Potentiometer
Ø 280 mm (4 m)
Mechanics/electronics
Supply voltage:
Ripple:
Current consumption:
Output type:
Switching mode:
Switching mode selector:
Output current Imax.:
Response time:
1)
10 V DC ... 30 V DC
± 10 % ²⁾
3)
≤ 30 mA
PNP
Light/dark switching
Selectable via light/dark rotary switch
100 mA
≤ 0.5 ms ⁴⁾
Photoelectric sensorsAAAAAAAAAAAAA© SICK AG. Subject to change without notice.AAAAAAAAAAAAA2/15/2016 2:30:49 AM