PFT-SRB040SG1SSAVMSSZ Datasheet, PDF (2/6 Pages) SICK AG – PRESSURE SENSORS

PFT-SRB040SG1SSAVMSSZ | PFT
PRESSURE SENSORS
A
B
C
D
E
F
H
I
J
K
L
M
N
O
P
Q
R
S
T
Ordering information
Type
PFT-SRB040SG1SSAVMSSZ
Other models and accessories www.sick.com/PFT
Illustration may differ
Part no.
6038744
Detailed technical data
Features
Medium
Pressure type
Measuring range
Process temperature
Output signal
Performance
Non-linearity
Accuracy
Non-repeatability
Response time (10 % ... 90 %)
Long-term drift/one-year stability
Temperature coefficient in rated tempera-
ture range
Rated temperature range
Service life
Mechanics/electronics
Process connection
Wetted parts
Internal transmission fluid
Pressure port
Housing material
Electrical connection
Supply voltage
Electrical safety
Liquid, gaseous
Gauge pressure
0 bar ... 40 bar
–30 °C ... +100 °C
0 V ... 10 V, 3-wire
≤ ± 0.2 %, of span (Best Fit Straight Line, BFSL) according to IEC 61298-2
≤ ± 0.5 % of the span
= ± 0.25% of span (optional for pressure ranges = 0.25 bar). Applies inclusive of non-linearity,
hysteresis, non-repeatability, zero point and full scale error (corresponds to error of measure-
ment as per IEC 61298-2) calibrated in vertical installation position
≤ ± 0.1 % of the span
≤ 1 ms ≤ 10 ms at medium temperatures below < –30°C for pressure ranges up to 25 bar or
with flush-mounted membrane
≤ ± 0.2 % of span (at reference conditions)
Mean TC of zero: ≤ 0.2 % of span / 10 K (< 0.4 % for pressure ranges ≤ 0.25 bar), Mean TC of
span ≤ 0.2 % of span / 10 K
0 °C ... +80 °C
Minimum 100 Mio. life cycles
G ¼ A according to DIN 3852-E
Standard memrane: Stainless steel 1.4571, stainless steel 1.4534 for measuring ranges >
25 bar
Synthetic oil (Not available for version with standard membrane for pressure ranges > 25 bar)
Standard
Stainless steel 1.4571
Round connector M12 x 1, 4-pin, IP 67
2
FLUID SENSORS | SICK
Online data sheet | 2016-08-17 15:00:09
Subject to change without notice