PBT-RB060SG1NSNAMA0Z Datasheet, PDF (2/7 Pages) SICK AG – PRESSURE SENSORS

PBT-RB060SG1NSNAMA0Z | PBT
PRESSURE SENSORS
A
B
C
D
E
F
H
I
J
K
L
M
N
O
P
Q
R
S
T
Ordering information
Type
PBT-RB060SG1NSNAMA0Z
Other models and accessories www.sick.com/PBT
Illustration may differ
Part no.
6045099
Detailed technical data
Features
Medium
Pressure type
Measuring range
Process temperature
Output signal
Performance
Non-linearity
Accuracy
Adjustment accuracy of zero signal
Hysteresis
Non-repeatability
Response time
Signal noise
Long-term drift/one-year stability
Rated temperature range
Service life
Mechanics/electronics
Process connection
Wetted parts
Internal transmission fluid
Pressure port
Housing material
Liquid, gaseous
Gauge pressure
0 bar ... 60 bar
0 °C ... +80 °C
4 mA ... 20 mA
≤ ± 0.5 %, (Best Fit Straight Line, BFSL) according to IEC 61298-2
≤ ± 1 % of the span (with non-linearity 0.25 %)
≤ ± 0,6 % of Span (with non-linearity 0.25 % and with signal output 0 ... 5 V)
≤ ± 1,0 % of Span (with non-linearity 0.5 %)
Including non-linearity, hysteresis, zero point and full scale error (corresponds to error of mea-
surement as per IEC 61298-2)
≤ 0.5 % of span typ., ≤ 0.8 % of span max. (with non-linerarity 0.5 %)
≤ 0.16 % of the span
≤ 0.1 % of the span
< 4 ms
≤ 0.3 % of the span
≤ 0.1 % of span to IEC 61298-2
0 °C ... +80 °C
Minimum 100 Mio. life cycles
G ¼ A according to DIN 3852-E
Pressure Connection: stainless steel 316L
Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stain-
less steel 13-8 PH)
Silicone oil (only with pressure ranges < 0 bar ... 10 bar and ≤ 0 bar abs ... 25 bar abs)
0.3 mm pressure port
Stainless steel 316L
1) _{The pressure transmitter must be supplied with power by a limited energy circuit compliant with 9.3 of UL/EN/IEC 601010-1 or LPS to UL/EN/IEC 60950-1 or Class}
2 to UL 1310/UL1585 (NEC or CEC). The power supply must be suitable for operation above 2,000 m if the pressure transmitter is used above this altitude.
2
FLUID SENSORS | SICK
Online data sheet | 2016-08-17 15:00:09
Subject to change without notice