PAC50-FGC Datasheet, PDF (2/6 Pages) SICK AG – PRESSURE SENSORS

PAC50-FGC | PAC50
PRESSURE SENSORS
A
B
C
D
E
F
H
I
J
K
L
M
N
O
P
Q
R
S
T
Ordering information
Type
PAC50-FGC
Other models and accessories www.sick.com/PAC50
Part no.
1077857
Illustration may differ
Detailed technical data
Features
Medium
Pressure type
Measuring range
Process temperature
Analog signal output and ohmic load R_A
Zero point adjustment
Output signal
Diagnostics output
Display
Initialization time
Performance
Non-linearity
Accuracy
Setting accuracy of switching outputs
Non-repeatability
Rated temperature range
Mechanics/electronics
Process connection
Housing material
Dry compressed air
Gauge pressure
–1 bar ... 10 bar
0 °C ... +60 °C
Optional, 4 mA ... 20 mA / 0 V… 10 V. Automatic detection depending on connected load or
programmable. Output signals can be inverted: 20 mA ... 4 mA / 10 V ... 0 V
Load resistance for current output < 600 Ohm
Load resistance with current output > 3 kOhm
Max. + 5 % of span
2 x PNP/NPN/Push-Pull + 4 mA ... 20 mA / 0 V ... 10 V
Switching output 2 can be set as diagnostics output
LCD with LED backlight (green/red), can be rotated electronically by 180°
Pressure display: 4 digits, 16 segments
Pressure unit in display can be switched: bar, MPa, kPa, psi and inHg
Update: 1,000, 500, 200, 100 ms (adjustable)
300 ms
≤ ± 0.5 %, of span (Best Fit Straight Line, BFSL) according to IEC 61298-2
≤ ± 1.5 % of the span including non-linearity, hysteresis, zero point and full scale error (corre-
sponds to error of measurement as per IEC 61298-2)
≤ ± 0.2 % of span
≤ ± 0.2 % of the span
+10 °C ... +60 °C
2 x G ¼ ¹⁾
Housing: polycarbonate, Buttons: TPE, DIN rail mounting: POM, seals: NBR
1) _{Bottom side: thread G ¼ female, back side: thread G ¼ female, both according to DIN ISO 1630.}
2) _{When plugged in with a suitable mating connector.}
2
FLUID SENSORS | SICK
Online data sheet | 2016-03-19 00:51:29
Subject to change without notice