|
SMS05T1_14 Datasheet, PDF (1/4 Pages) ON Semiconductor – SC-74 Quad Transient Voltage Suppressor | |||
|
SMS05T1 Series
SC-74 Quad Transient
Voltage Suppressor
for ESD Protection
This quad monolithic silicon voltage suppressor is designed for
applications requiring transient overvoltage protection capability. It is
intended for use in voltage and ESD sensitive equipment such as
computers, printers, business machines, communication systems and
other applications. This quad device provides superior surge
protection over current quad Zener MMQA series by providing up to
350 watts peak power.
Features
⢠SC-74 Package Allows Four Separate Unidirectional Configurations
⢠Peak Power â 350 W, 8 x 20 mS
⢠ESD Rating of Class N (Exceeding 25 kV) per
the Human Body Model
⢠ESD Rating:
IEC 61000â4â2 (ESD) 15 kV (air) 8 kV (contact)
IEC 61000â4â4 (EFT) 40 A (5/50 ns)
IEC 61000â4â5 (lightning) 23 A (8/20 ms)
⢠UL Flammability Rating of 94 Vâ0
⢠These Devices are PbâFree and are RoHS Compliant
⢠SZ Prefix for Automotive and Other Applications Requiring Unique
Site and Control Change Requirements; AECâQ101 Qualified and
PPAP Capable
Typical Applications
⢠Hand Held Portable Applications such as Cell Phones, Pagers,
Notebooks and Notebook Computers
MAXIMUM RATINGS
Rating
Symbol Value
Unit
Peak Power Dissipation
Ppk
8 x 20 mS @ TA = 25°C (Note 1)
Total Power Dissipation on FRâ5 Board
PD
@ TA = 25°C (Note 2)
Derate Above 25°C
350
W
225
mW
1.8
mW/°C
Thermal Resistance,
JunctionâtoâAmbient
RqJA
556
°C/W
Junction and Storage
Temperature Range
TJ, Tstg â 55 to +150 °C
Lead Solder Temperature
Maximum 10 Seconds Duration
TL
260
°C
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected.
1. Nonârepetitive current pulse 8 x 20 mS exponential decay waveform
2. FRâ5 = 1.0 x 0.75 x 0.62 in.
http://onsemi.com
SCâ74 QUAD TRANSIENT
VOLTAGE SUPPRESSOR
350 WATTS PEAK POWER
5 VOLTS
6
1
SCâ74
CASE 318F
STYLE 1
MARKING DIAGRAM
xxx M G
G
1
xxx = Specific Device Code
M = Date Code*
G = PbâFree Package
(Note: Microdot may be in either location)
*Date Code orientation and/or position may
vary depending upon manufacturing location.
PIN ASSIGNMENT
1
6
PIN 1. CATHODE
2. ANODE
2
5
3. CATHODE
4. CATHODE
3
4
5. ANODE
6. CATHODE
DEVICE MARKING INFORMATION
See specific marking information in the device marking
column of the Electrical Characteristics table on page 2 of
this data sheet.
ORDERING INFORMATION
See detailed ordering, marking and shipping information in the
ordering information section on page 2 of this data sheet.
© Semiconductor Components Industries, LLC, 2014
1
September, 2014 â Rev. 8
Publication Order Number:
SMS05T1/D
|
▷ |