SMCJ36A Datasheet, PDF (1/4 Pages) Shunye Enterprise – Surface Mount Transient Voltage Suppressors

SMCJ5.0 thru 188CA
Surface Mount Transient Voltage Suppressors
Peak Pulse Power 1500W Stand-off Voltage 5.0 to 188V
Features
‹ Plastic package has Underwriters Laboratory Flammability
Classification 94V-0
‹ Low profile package with built-in strain relief for surface
mounted applications
‹ Glass passivated junction
‹ Low incremental surge resistance, excellent clamping capability
‹ 1500W peak pulse power capability with a 10/1000us
waveform, repetition rate (duty cycle): 0.01%
‹ Very fast response time
‹ High temperature soldering guaranteed:
250^oC/10 seconds at terminals
Mechanical Data
‹ Case: JEDEC DO-214AB(SMC J-Bend) molded plastic over
passivated junction
‹ Terminals: Solder plated, solderable per MIL-STD-750,
Method 2026
‹ Polarity: For unidirectional types the band denotes the cathode,
which is positive with respect to the anode under normal TVS
operation
‹ Weight: 0.007oz., 0.21g
Devices for Bidirectional Applications
For bi-directional devices, use suffix CA (e.g. SMCJ10CA). Electrical characteristics apply in both directions.
Maximum Ratings and Thermal Characteristics
(Ratings at 25^oC ambient temperature unless otherwise specified.)
Parameter
Symbol
Value
Peak pulse power dissipation with
a 10/1000us waveform ^{(1) (2)}
P_PPM
Minimum 1500
Peak pulse current with a 10/1000us waveform ⁽¹⁾
I_PPM
Peak forward surge current 8.3ms single half sine-wave
uni-directional only ⁽²⁾
I_FSM
See Next Table
200
Typical thermal resistance, junction to ambient ⁽³⁾
R_θJA
75
Typical thermal resistance, junction to lead
R_θJL
15
Operating junction and storage temperature range
T_J, T_STG
-55 to +150
Notes:
1. Non-repetitive current pulse, per Fig.3 and derated above T_A=25^oC per Fig. 2
2. Mounted on 0.31 x 0.31" (8.0 x 8.0 mm) copper pads to each terminal
3. Mounted on minimum recommended pad layout
Unit
W
A
A
o_C/W
o_C/W
o_C
www.shunyegroup.com.cn