M1G Datasheet, PDF (1/2 Pages) Tyco Electronics – Double-Balanced Mixer

M1G THRU M7G
SURFACE MOUNT GLASS GENERAL RECTIFIER
Reverse Voltage – 50 to 1000 V
Forward Current – 1 A
Features
• For surface mounted applications
• Low profile package
• Built-in strain relief
• Easy pick and place
• Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
• Glass passivated chip junction
Mechanical Data
• Case: SMA (DO-214AC), molded plastic.
• Terminals: Solder plated, solderable per MIL-STD-750
Method 2026
• Polarity: Indicated by cathode band.
Absolute Maximum Ratings and Characteristics
Ratings at 25^OC ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Paramter
Symbols M1G M2G M3G M4G M5G M6G M7G Units
Maximum Recurrent Peak Reverse Voltage
VRRM 50 100 200 400 600 800 1000
V
Maximum RMS Voltage
VRMS 35 70 140 280 420 560 700
V
Maximum DC Blocking Voltage
VDC
50 100 200 400 600 800 1000
V
Maximum Average Forward Rectified Current
at TL = 100 ^OC
I(AV)
1
A
Peak Forward Surge Current 8.3ms Single Half
Sine-wave Superimposed on Rated Load (JEDEC IFSM
30
A
method)
Maximum Instantaneous Forward Voltage at 1 A
VF
1.1
V
Maximum DC Reverse Current at TA = 25 ^OC
at Rated DC Blocking Voltage at TA = 125 ^OC
IR
Typical Junction Capacitance ¹⁾
CJ
Typical Thermal Resistance ²⁾
R_θJL
5
µA
50
12
pF
30
O_C/W
Operating and Storage Temperature Range
TJ ,TS
- 55 to + 150
O_C
1) _{Measured at 1 MHz and applied VR = 4 V.}
2) _{8 mm}2 _{(0.013 mm thick) land areas.}
www.shunyegroup.com.cn