KBPC35005W Datasheet, PDF (1/2 Pages) Galaxy Semi-Conductor Holdings Limited – SILICON BRIDGE RECTIFIERS

KBPC35005W THRU KBPC3510W AND MB3505W THRU MB3510W
SILICON BRIDGE RECTIFIERS
Reverse Voltage - 50 to 1000 Volts Forward Current - 35.0 Amperes
MB-35W
FEATURES
0.042(1.10) DIA.
0.038(0.97)
0.452 _MAX.
(11.5)
0.591 _MAX.
(15.0)
The plastic package carries Underwriters Laboratory
Flammability Classification 94V-0
Ideal for printed circuit boards
Low reverse leakage
High forward surge current capability
High temperature soldering guaranteed:
260 C/10 seconds,at 5 lbs. (2.3kg) tension
1.181(30.0)
1.102(28.0)
0.673(17.1)
0.633(16.1)
HOLE FOR
NO.8 SCREW
MECHANICAL DATA
0.732(18.6)
0.692(17.6)
AC
+
-
AC
1.181(30.0)
1.102(28.0)
0.468(11.9)
0.429(10.9)
0.732(18.6)
0.692(17.6)
0.033x.250
(0.8x6.4)
Dimensions in inches and (millimeters)
Case:Metal case
Terminals: Lead 0.040” (1.02mm) diameter.
Polarity: Polarity symbols marked on case
Mounting:Thru hole for #8 screw,20in.-lbs. torque max.
Weight:0.93 ounce, 26.4 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 C ambient temperature unless otherwise specified.
Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%.
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward output rectified
current at TC=50 C (Note 1,2)
Peak forward surge current
8.3ms single half sine-wave superimposed on
rated load (JEDEC Method)
Rating for Fusing(t<8.3ms)
Maximum instantaneous forward voltage dorp
per bridge element at 17.5A
Maximum DC reverse current TA=25 C
at rated DC blocking voltage TA=100 C
Isolation voltage from case to leads
Typical Thermal Resistance (Note 2)
Operating junction temperature range
storage temperature range
KBPC KBPC KBPC KBPC KBPC KBPC KBPC
SYMBOLS 35005W 3501W ^{3502W 3504W 3506W 3508W 3510W} UNITS
MB3505W MB351W MB352W MB354W MB356W MB358W MB3510W
VRRM
50
100 200 400 600 800 1000 ^VOLTS
VRMS
35
70 140 280 420 560 700 ^VOLTS
VDC
50
100 200 400 600 800 1000 ^VOLTS
I(AV)
35
Amps
IFSM
I²t
VF
IR
VISO
RqJA
TJ
TSTG
400.0
664
1.1
10
1.0
2500
2.0
-65 to +150
-65 to +150
Amps
A²s
Volts
uA
mA
VAC
C/W
C
C
NOTES:
1.Unit mounted on 9” x3.5” x4.6” thick(23cmx9cmx11.8cm)Al.plate.
2.Bolt dowm on heat-sink with silicone thermal compound between bridge and mounting surface for
maximum heat transfer efficiency with #8 screw.
www.shunyegroup.com.cn