KBPC25005 Datasheet, PDF (1/2 Pages) Shanghai Sunrise Electronics – SINGLE PHASE SILICON BRIDGE RECTIFIER

KBPC25005 THRU KBPC2510 AND MB2505 THRU MB2510
SILICON BRIDGE RECTIFIERS
Reverse Voltage - 50 to 1000 Volts Forward Current - 25.0 Amperes
MB-25
1.181(30.0)
1.102(28.0)
0.673(17.1)
0.633(16.1)
.452 _MAX.
(11.5)
0.480(12.2)
0.425(10.8)
HOLE FOR
NO.8 SCREW
0.732(18.6)
0.692(17.6)
AC
+
-
AC
1.181(30.0)
1.102(28.0)
0.673(17.1)
0.633(16.1)
0.582(14.8)
0.543(13.8)
0.033x0.250
(0.8x6.4)
Dimensions in inches and (millimeters)
FEATURES
The plastic package carries Underwriters Laboratory
Flammability Classification 94V-0
Ideal for printed circuit boards
Low reverse leakage
High forward surge current capability
High temperature soldering guaranteed:
260 C/10 seconds,5 lbs. (2.3kg) tension
MECHANICAL DATA
Case:Metal case
Terminals: Plated 0.25” (6.35mm)lug.
Polarity: Polarity symbols marked on case
Mounting:Thru hole for #8 screw,20in.-lbs. torque max.
Weight:1.02 ounce, 29 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 C ambient temperature unless otherwise specified.
Single phase,half wave 60Hz,resistive or inductive load,for current capacitive load, derate by 20%.
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward output rectified
current at TC=50 C (Note 1,2)
SYMBOLS
VRRM
VRMS
VDC
KBPC
25005
MR2505
50
35
50
KBPC
2501
MB251
100
70
100
KBPC
2502
MB252
200
140
200
KBPC
2504
MB254
400
280
400
KBPC
2506
MB256
600
420
600
I(AV)
25
Peak forward surge current
8.3ms single half sine-wave superimposed on
IFSM
rated load (JEDEC Method)
300.0
Rating for Fusing(t<8.3ms)
I²t
373
Maximum instantaneous forward voltage dorp
per bridge element at 12.5A
VF
1.1
Maximum DC reverse current TA=25 C
IR
at rated DC blocking voltage TA=100 C
Isolation voltage from case to leads
VISO
Typical Thermal Resistance (Note 2)
RqJA
Operating junction temperature range
TJ
storage temperature range
TSTG
10
1.0
2500
2.0
-65 to +150
-65 to +150
KBPC
2508
MR258
800
560
800
KBPC
2510
MB2510
1000
700
1000
UNITS
VOLTS
VOLTS
VOLTS
Amps
Amps
A²s
Volts
uA
mA
VAC
C/W
C
C
NOTES:
1.Unit mounted on 5” x 6” x4.9” thick(12.8cmx15.2cmx12.4cmcm)Al.plate.
2.Bolt dowm on heat-sink with silicone thermal compound between bridge and mounting surface for
maximum heat transfer efficiency with #8 screw.
www.shunyegroup.com.cn