KBPC15005 Datasheet, PDF (1/2 Pages) Wing Shing Computer Components – SINGLE-PHASE SILICON BRIDGE RECTIFIER(VOLTAGE RANGE - 50 to 1000 Volts CURRENT - 15Amperes)

KBPC15005 THRU KBPC1510 AND MB1505 THRU MB1510
SILICON BRIDGE RECTIFIERS
Reverse Voltage - 50 to 1000 Volts Forward Current - 15.0 Amperes
MB-15
1.181(30.0)
1.102(28.0)
0.673(17.1)
0.633(16.1)
.452 _MAX.
(11.5)
0.480(12.2)
0.425(10.8)
HOLE FOR
NO.8 SCREW
0.732(18.6)
0.692(17.6)
AC
+
-
AC
1.181(30.0)
1.102(28.0)
0.673(17.1)
0.633(16.1)
0.582(14.8)
0.543(13.8)
0.033x0.250
(0.8x6.4)
Dimensions in inches and (millimeters)
FEATURES
The plastic package carries Underwriters Laboratory
Flammability Classification 94V-0
Ideal for printed circuit boards
Low reverse leakage
High forward surge current capability
High temperature soldering guaranteed:
260 C/10 seconds,5 lbs. (2.3kg) tension
MECHANICAL DATA
Case:Metal case
Terminals: Plated 0.25” (6.35mm)lug.
Polarity: Polarity symbols marked on case
Mounting:Thru hole for #8 screw,20in.-lbs. torque max.
Weight:1.02 ounce, 29 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 C ambient temperature unless otherwise specified.
Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%.
Maximum repetitive peak reverse voltage
SYMBOLS
VRRM
KBPC
15005
MR1505
50
KBPC
1501
MB151
100
KBPC
1502
MB152
200
KBPC
1504
MB154
400
KBPC
1506
MB156
600
Maximum RMS voltage
VRMS
35
70 140 280 420
Maximum DC blocking voltage
VDC
50 100 200 400 600
Maximum average forward output rectified
current at TC=55 C (Note 1,2)
I(AV)
15
Peak forward surge current
8.3ms single half sine-wave superimposed on
IFSM
rated load (JEDEC Method)
300.0
Rating for Fusing(t<8.3ms)
I²t
373
Maximum instantaneous forward voltage dorp
per bridge element at 7.5A
VF
1.1
Maximum DC reverse current TA=25 C
IR
at rated DC blocking voltage TA=100 C
Isolation voltage from case to leads
VISO
Typical Thermal Resistance (Note 2)
RqJA
Operating junction temperature range
TJ
storage temperature range
TSTG
10
1.0
2500
2.0
-65 to +150
-65 to +150
KBPC
1508
MR158
800
560
800
NOTES:
1.Unit mounted on 5” x 4” x3” thick(12.8cmx10.2cmx7.3cmcm)Al.plate.
2.Bolt dowm on heat-sink with silicone thermal compound between bridge and mounting surface for
maximum heat transfer efficiency with #8 screw.
KBPC
1510
MB1510
1000
700
1000
UNITS
VOLTS
VOLTS
VOLTS
Amps
Amps
A²s
Volts
uA
mA
VAC
C/W
C
C
www.shunyegroup.com.cn