5KP Datasheet, PDF (1/4 Pages) Surge Components – GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE-5.0 to 110 Volts

5KP5.0 THRU 5KP110A
GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR
Breakdown Voltage:5.0-110 Volts Peak Pulse Power:5000 Watts
R-6
FEATURE
0.360(9.1)
0.340(8.6)
DIA.
1.0 (25.4)
MIN.
0.360(9.5)
0.340(8.6)
0.052(1.3)
0.048(1.2)
DIA.
1.0 (25.4)
MIN.
Dimensions in inches and (millimeters)
Available in unidirectional only
5000w peak pulse power capability
Excellent clamping capability
Low incremental surge resistance
Fast response time:typically less than 1.0ps from 0v to
VBR for unidirectional and 5.0ns ror bidirectional types.
High temperature soldering guaranteed:
265 C/10S/9.5mm lead length at 5 lbs tension
MECHANICAL DATA
Case: R-6 molded plastic body over
passivated junction
Terminals: Plated axial leads, solderable per MIL-STD 750
method 2026
Polarity: Color band denotes cathode except for
bidirectional types
Mounting Position: Any
Weight: 0.072 ounce,2.05 grams
MAXIMUM RATINGS AND CHARACTERISTICS
Ratings at 25 C ambient temperature unless otherwise specified.
SYMBOLS
VALUE
UNITS
Peak power dissipation
(Note 1)
PPPM
Minimum 5000
Peak pulse reverse current (Note 1, Fig.3)
IPPM
See Table 1
Steady state power dissapation (Note 2)
PM(AV)
8.0
Peak forward surge current (Note 3)
IFSM
400
Maximum instantaneous forward voltage at 100A
VF
3.5
for unidirectional only
(Note 3)
Operating junction and storage temperature range
TSTG,TJ
-55 to + 175
Note:
1.10/1000ms waveform non-repetitive current pulse,per Fig.3 and derated above Ta=25 C per Fig.2
2.TL=75 C,lead lengths 9.5mm,Mounted on copper pad atea of (20x20mm)Fig.5
3.Measured on 8.3ms single half sine-wave or equivalent square wave,duty cycle=4 pulses per minute maximum.
Watts
Amps
Watts
Amps
Volts
C
www.shunyegroup.com.cn