HDMIF389A5DC Datasheet, PDF (7/11 Pages) Shoulder Electronics Limited. – SAW FILTER

SAW FILTER
HDMIF389A5Dc SIP5Dc
Solder ability
measurement shall be made. Test board shall be
1.6 mm thick. Base material shall be glass fabric
base epoxy resin.
Immerse the pins melt solder at 260℃+5/-0℃
for 5 sec.
More then 95% of
total area of the
pins should be
covered with solder
焊锡覆盖面积大于
95%
3.4 Mechanical Test
Items
Conditions
Vibration
600-3300rpm amplitude 1.5mm
3 directions 2 H each
Drop
On maple plate from 1 m high 3 times
Lead pull
Lead bend
Pull with 1 kg force for 30 seconds
90^o bending with 500g weigh 2 times
Specifications
There shall be no
damage.
3.5 Voltage Discharge Test
Item
Condition
Surge
Between any two electrode
Specifications
There shall be no
damage
www.shoulder.cn Tel:[phone] Fax:[phone] E-mail:[e-mail]
Page 7 of 11