HDBF07014A24 Datasheet, PDF (7/7 Pages) Shoulder Electronics Limited. – This specification shall cover the characteristics of SAW filter HDBF07014A24

SAW FILTER
HDBF07014A24 SMD-24
1.5 mm at 10 to 55 Hz. The device shall fulfill the specifications in table 1.
5-8 Lead fatigue
5-8-1 Pulling test
Weight along with the direction of lead without an shock 1kg. The device shall satisfy all
the initial Characteristics.
5-8-2 Bending test
Lead shall be subject to withstand against 90℃ bending with 450g weight in the
direction of thickness. This operation shall be done toward both direction. The
device shall show no evidence of damage and shall satisfy all the initial electrical
characteristics.
6. REMARK
7.1 Static voltage
Static voltage between signal load & ground may cause deterioration &destruction of
the component. Please avoid static voltage.
7.2 Ultrasonic cleaning
Ultrasonic vibration may cause deterioration & destruction of the component. Please
avoid ultrasonic cleaning
7.3 Soldering
Only leads of component may be soldered. Please avoid soldering another part of
component.
www.shoulder.cn Tel:[phone] Fax:[phone] E-mail:[e-mail]
Page 7 of 7