HDBF16021A61 Datasheet, PDF (4/6 Pages) Shoulder Electronics Limited. – This specification shall cover the characteristics of SAW filter HDBF16021A61

SAW FILTER
3. DIMENSION
HDBF16021A61 SF6-1
4.TEST CIRCUIT
5. ENVIRONMENTAL CHARACTERISTICS
5-1 High temperature exposure
Subject the device to +85℃ for 16 hours. Then release the filter into the room conditions
for 24 hours prior to the measurement. It shall fulfill the specifications in table 1.
5-2 Low temperature exposure
Subject the device to -20℃ for 16 hours. Then release the device into the room conditions
for 24 hours prior to the measurement. It shall fulfill the specifications in table 1.
5-3 Temperature cycling
Subject the device to a low temperature of -40℃for 30 minutes. Following by a high
temperature of +80℃ for 30 Minutes. Then release the device into the room conditions
for 24 hours prior to the measurement. It shall meet the specifications in table 1.
5-4 Resistance to solder heat
www.shoulder.cn Tel:[phone] Fax:[phone] E-mail:[e-mail]
Page 4 of 6