ZTA-MT Datasheet, PDF (3/7 Pages) Shoulder Electronics Limited. – This specification shall cover the characteristics of the ceramic resonator 6.01-13.00MHZ.

4.2 ELECTRICAL SPECIFICATIONS
Items
Oscillation Frequency Fosc（MHz）
Frequency Accuracy （%）
Resonant Impedance Ro（Ω）max.
Temperature Coefficient of Oscillation
Frequency （%） max.
Aging Rate （%）max.
Requirement
6.01-13.00
±0.5
25
±0.3（Oscillation Frequency drift，-25
℃～+85℃）
±0.3 （For Ten Years）
5．TEST
5.1 Test Conditions
Parts shall be tested under the condition ( Temp.：20±15℃,Humidity ：65±20%
R.H.) unless the standard condition(Temp.：25±2℃,Humidity ：65±5% R.H.)
is regulated to measure.
5.2 Test Circuit
IC：1/6TC4069UBP×2
X：CERAMIC RESONATOR
C1 C2：30pF
6 PHYSICAL AND ENVIRONMENTAL CHARACTERISTICS
No.
Item
Condition of Test
Performance
Requirement
6.1 Humidity
Subject the resonator at 40±2℃ and 90%-95%
R.H. for 500h, resonator shall be measured after
It shall fulfill Table
1.
being placed in natural conditions for 1h.
High
Subject the resonator to 85±2℃ for 500h,
It shall fulfill Table
6.2 Temperature resonator shall be measured after being placed in _1.
Exposure natural conditions for 1h.
Low
Subject the resonator to -25±2℃ for 500h,
It shall fulfill Table
6.3 Temperature resonator shall be measured after being placed in _1.
Exposure natural conditions for 1h.
Temperature ^{After temperature cycling of blow table was} It shall fulfill Table
6.4
Cycling
performed 5 times, Filter shall be measured after _1.
being placed in natural conditions for 1h.
Temperature
Time
Http://www.shoulder.cn
Page: 3
SHOULDER ELECTRONICS LIMITED