GP1S53VJ000F Datasheet, PDF(9/12 Page) Sharp Electrionic Components – Gap : 5mm, Slit : 0.5mm Phototransistor Output, Case package Transmissive Photointerrupter

English

English German Russian Spanish Italian Polish Chinese Japanese Korean French Portuguese	Language :

GP1S53VJ000F Datasheet, PDF (9/12 Pages) Sharp Electrionic Components – Gap : 5mm, Slit : 0.5mm Phototransistor Output, Case package Transmissive Photointerrupter

◁

â Manufacturing Guidelines

â Soldering Method

Flow Soldering:

Soldering should be completed below 260ËC and within 5 s.

Please take care not to let any external force exert on lead pins.

Please don't do soldering with preheating, and please don't do soldering by reï¬ow.

GP1S53VJ000F

Hand soldering

Hand soldering should be completed within 3 s when the point of solder iron is below 350ÌC.

Please solder within one time.

Please don't touch the terminals directly by soldering iron.

Soldered product shall treat at normal temperature.

Other notice

Please test the soldering method in actual condition and make sure the soldering works fine, since the

impact on the junction between the device and PCB varies depending on the cooling and soldering

conditions.

Flux

Some ï¬ux, which is used in soldering, may crack the package due to synergistic effect of alcohol in ï¬ux and

the rise in temperature by heat in soldering. Therefore, in using ï¬ux, please make sure that it does not have

any inï¬uence on appearance and reliability of the photointerrupter.

Sheet No.: D2-A02601EN

▷