GP2S60 Datasheet, PDF (5/6 Pages) Sharp Electrionic Components – Subminiature, Reflective Type Photointerrupter for Automatic Mounting

Fig.13 Relative Collector Current vs.OMS
Card Moving Distance
100
OMS test card
d
1mm
80
Sensor _{+ 0 −}
VCE=2V
IF=4mA
60
d=1mm
40
20
−3 −2 −1 0 1 2 3 4 5 6
OMS card moving distance (mm)
Fig.15 Reflow Soldering
Only one time soldering is available within the temperature profile
shown below.
Max. 240°C
200°C
Max. 165°C
1 to 4˚C/s
1 to 4˚C/s
GP2S60
Fig.14 Relative Collector Current vs.OMS
Card Moving Distance
100
OMS test card
d
1mm
80
Sensor _{+ 0 −}
V_CE=2V
IF=4mA
d=1mm
60
40
20
−3 −2 −1 0 1 2 3 4 5 6
OMS card moving distance (mm)
1 to 4˚C/s
25°C
Max.60s
Max.10s
Max.120s
Max.90s
I Other Precautions
An infrared lamp used to heat up for soldering may cause a localized temperature rise in the resin. So keep the package
temperature within that specified in Item 1. Also avoid immersing the resin part in the solder. Even if within the temperature
profile above, there is the possibility that the gold wire in package is broken in case that the deformation of PCW gives the
affection to lead pins. Please use after confirmation the conditions fully by actual solder reflow machine.