GP1FAV31RK0F Datasheet, PDF (5/9 Pages) Sharp Electrionic Components – Fiber Optic Receiver Square connector With mounting hole With shutter

GP1FAV31RK0F
Fig. 2 Output Voltage and Pulse Response
Fiber optic cable
Standard transmitter
GP1FAV31RK0F Device under test
V_in
Input
VCC GND
3V
15.5 Mb/s NRZ, Duty 50 %
VCC
CH1
CH2
GND
VCC
Vout
Rso
Rsi
Tektronix 7834 or
7934 type Oscilloscope
Fig. 3 Input and Output Signal
Standard Transmitter
Input signal (CH1)
V_oH
GP1FAV31RK0F
Output signal (CH2)
V_oL
tpLH
t_r
t_f
tpHL
50%
90%
50%
10%
Notes
(1) VCC = 3.0V (State of operating)
(2) The fiber coupling light output set at –14.5 dBm or –24.0 dBm.
(3) The probe for the oscilloscope must be more than 1 MΩ and less than 10 pF.
(4) R_si, R_so: Standard load resistor (R_si: 3.3 kΩ, R_so: 2.2 kΩ)
(5) The output (H/L level) of this device are not fixed constantly when it receivers
the modulating light (including DC light, no input light) less than 0.1 Mb/s.
Sheet No.: E2-A01401EN
5