PC411L0YIP0F Datasheet, PDF (4/13 Pages) Sharp Electrionic Components – High Speed 15Mb/s, High CMR Mini-flat Package OPIC Mini-flat Package ∗OPIC

■ Absolute Maximum Ratings
(T_a=25˚C)
Parameter
Symbol Rating
Unit
*1 _{Forward current}
Input
I_F
Reverse voltage V_R
20
mA
5
V
Supply voltage V_CC 0 to +6.0
V
Output Output voltage
V_O −0.5 to +5.5 V
Output current
I_O
2
mA
Operating temperature
T_opr −40 to +85 ˚C
Storage temperature
*2 _{Isolation voltage}
*3 _{Soldering temperature}
T_stg −55 to +125 ˚C
V_{iso (rms)}
3.75
kV
T_sol
260
˚C
*1 When ambient temperature goes above 70˚C, the power dissipation goes down at
0.6mA/˚C. (Fig.3)
*2 40 to 60 %RH, AC for 1minute
*3 For 10s
PC411L0NIP0F Series
■ Electro-optical Characteristics^*4 _{(Unless otherwise specified Ta=−40 to 85˚C, VCC=4.5 to 5.5V, TYP. at Ta=25˚C, VCC=5V)}
Parameter
Symbol
Conditions
MIN. TYP. MAX. Unit
Forward voltage
V_F
T_a=25˚C, I_F=12mA
1.4 1.6 1.95 V
Reverse current
I_R
T_a=25˚C, V_R=5V
−
−
10
µA
Terminal capacitance
C_t
T_a=25˚C, V=0, f=1MHz
−
60 150 pF
High level output voltage
V_OH
IF=0, I_O=−20µA
4
5
−
V
Low level output voltage
V_OL
IF=12mA, I_O=20µA
−
1.5 100 mV
Low level supply current
I_CCL
I_F=12mA
−
2.1 14.0 mA
High level supply current
I_CCH
I_F=0
−
2.6 11.0 mA
"High→Low" input threshold current
Isolation resistance
I_FHL
V_O=2.5V
−
3.5 6.0 mA
R_ISO T_a=25˚C, DC500V, 40 to 60%RH 5×10¹⁰ 10¹¹
−
Ω
Floating capacitance
C_f
T_a=25˚C, V=0V, f=1MHz
−
0.6
1.0
pF
"High→Low" propagation delay time t_PHL
20
27
60
"Low→High" propagation delay time t_PLH
*5 _{Distortion of pulse width}
∆t_W
Propagation delay skew
T_PSK
Rise time
t_r
I_F=12mA, C_L=15pF
CMOS Logic level
t_r=t_f<1ns, Pulse width 100ns
Duty=50%
13
35
60
0
8
30
ns
−
−
40
−
4
−
Fall time
t_f
−
3
−
Instantaneous common mode rejection
voltage
(High level output)
Instantaneous common mode rejection
voltage
(Low level output)
CM_H
CM_L
T_a=25˚C, I_F=0,
V_CM=1.0kV_(P-P)
T_a=25˚C, I_F=12mA,
V_CM=1.0kV_(P-P)
15
20
−15 −20
−
kV/µs
−
*4 It shall connect a by-pass capacitor of 0.01 µF or more between V_CC (pin 6 ) and GND (pin 4 ) near the device.
when it measures the transfer characteristics and the output side characteristics.
*5 Distortion of pulse width ∆tw= | t_PHL−t_PLH |
Sheet No.: D2-A04902EN
4