GP2A200LCS Datasheet, PDF (4/5 Pages) Sharp Electrionic Components – Light Modulation, Reflective Type Photointerrupter

GP2A200LCS
Fig.5 Output Current vs. Ambient
Temperature
50
40
30
Fig.6 Low Level Output Voltage vs.
Ambient Temperature
0.3
VCC=5V
At detecting time
IOL=30mA
0.2
16mA
20
10
0
−10 0
25
50 70 75
Ambient temperature Ta (°C)
Fig.7 Low Level Output Voltage vs.
Low Level Output Current
0.5
0.4 ^VCC=5V
At detecting time
0.3
0.2
0.1
0.05
0.04
0.03
0.02
0.01
1
2 3 4 5 10 20 30 4050 100
Low level output current I_OL (mA)
0.1
5mA
0
−10 0 10 20 30 40 50 60 70
Ambient temperature Ta (°C)
Fig.8 Dissipation Current (Smoothing Value)
vs. Ambient Temperature
7
Ta=−10°C
6
25°C
5
70°C
4
3
2
1
0
4.75 4.85 4.95 5.05 5.15 5.25
Supply voltage V_CC (V)
s Precautions for Use
1. In order to stabilize power supply line, connect a by-pass capacitor of more than 0.33µF between VCC and GND near the device.
2. For cleaning
Acryle resin is used as the material of the lens surface. As to cleaning, this refractive type photointerrupter shall not clean by
cleaning materials absolutely. Dust and stain shall clean by air blow, or shall clean by soft cloth soaked in washing materials.
3. The connector should be plugged in / out at normal temperature.
4. As for other general precautions, refer to the chapter "Precautions for Use".