GP1A05EJ000F Datasheet, PDF (4/10 Pages) Sharp Electrionic Components – Gap : 5mm, Slit : 0.5mm OPIC Output Transmissive Photointerrupter with Connector

■ Absolute Maximum Ratings
(T_a=25˚C)
Parameter
Symbol Rating
Unit
Supply voltage
V_CC −0.5 to +8
V
*1 _{Low level output current}
I_OL
50
mA
*2 _{Operating temperature}
T_opr −20 to +75 ˚C
*2 _{Storage temperature}
T_stg −40 to +85 ˚C
∗_{1 Collector current of output transistor, refer to Fig.1.}
∗_{2 The connector should be plugged in/out at normal temperature.}
GP1A05EJ000F Series
■ Electro-optical Characteristics
Parameter
Symbol
Conditions
Low level supply current
I_CCL
Light beam interrupted
Low level output voltage
V_OL
Light beam interrupted, I_OL=16mA
High level supply current
I_CCH
Light beam uninterrupted
High level output voltage
V_OH
*3 _{Response frequency}
f
Light beam uninterrupted
No DC output is allowed
Operating supply voltage
V_CC
−
∗_{3 Response frequency is measured with the disk shown below being rotated.}
MIN.
−
−
−
V_CC×0.9
−
4.5
(V_CC=5V, T_a=25˚C)
TYP. MAX. Unit
−
30 mA
−
0.35
V
−
30 mA
−
−
V
− 3 000 Hz
−
5.5
V
Disk
(Unit : mm)
0.5
0.5
Sheet No.: D3-A06101EN
4