|
LZ24BP Datasheet, PDF (3/10 Pages) Sharp Electrionic Components – 1/4-type Progressive-scan Color CCD Area Sensor with 350 k Pixels | |||
|
◁ |
LZ24BP
RECOMMENDED OPERATING CONDITIONS
PARAMETER
SYMBOL
MIN. TYP. MAX. UNIT NOTE
Ambient operating temperature
TOPR
25.0
ËC
Output transistor drain voltage
VOD
14.55 15.0 15.45 V
Overflow drain clock p-p level
VÃOFD
22.5
V
1
Ground
GND
0.0
V
P-well voltage
VPW
â10.0
VÃVL
V
2
Vertical shift
register clock
LOW level
INTERMEDIATE level
VÃV1L, VÃV2L
VÃV3AL, VÃV3BL
VÃV1I, VÃV2I
VÃV3AI, VÃV3BI
â9.5 â9.0 â8.5 V
0.0
V
HIGH level
VÃV3AH, VÃV3BH
14.55 15.0 15.45 V
Horizontal shift LOW level
VÃH1L, VÃH2L
â0.05 0.0 0.05 V
register clock HIGH level
VÃH1H, VÃH2H
3.0 3.3 5.5
V
Reset gate clock p-p level
VÃRS
3.0 3.3 5.5
V
1
Vertical shift register clock frequency
fÃV1, fÃV2
fÃV3A, fÃV3B
15.73
kHz
Horizontal shift register clock frequency
fÃH1, fÃH2
12.27
MHz
Reset gate clock frequency
fÃRS
12.27
MHz
NOTES :
1. Use the circuit parameter indicated in "SYSTEM CONFIGURATION EXAMPLE", and do not connect to DC voltage directly.
2. VPW is set below VÃVL that is low level of vertical shift register clock, or is used with the same power supply that is connected
to VL of V driver IC.
* To apply power, first connect GND and then turn on VOD. After turning on VOD, turn on PW first and then turn on other powers
and pulses. Do not connect the device to or disconnect it from the plug socket while power is being applied.
3
|
▷ |