GP2W0110YPS Datasheet, PDF (3/14 Pages) Sharp Electrionic Components – Low Power Infrared Transceiver

Low Power Infrared Transceiver
GP2W0110YPS/GP2W0114YPS
ABSOLUTE MAXIMUM RATINGS
PARAMETER
SYMBOL MIN. MAX. UNIT
Supply Voltage
LED Supply Voltage
Peak Forward LED Current
Operating Temperature
Storage Temperature
Soldering Temperature*
V_DD
V_LEDA
I_FM
T_OPR
T_STG
T_SOL
0 6.0 V
0 7.0 V
60 mA
-40 +85 °C
-40 +85 °C
230 °C
NOTE: *See Figure 12 for Soldering Reflow Profile.
RECOMMENDED OPERATING CONDITIONS
PARAMETER
SYMBOL MIN.
MAX. UNIT NOTES
Supply Voltage
V_DD
2.0
3.6
V
LED Supply Voltage
V_LEDA
2.0
6.0
V
Logic HIGH Shut-down Terminal Input Voltage V_IHSD V_DD × 0.67 V_DD
V
1
Logic LOW Shut-down Terminal Input Voltage V_ILSD
0.0
V_DD × 0.1 V
2
Logic HIGH Transmitter Input Voltage (TxD)
V_IHTXD V_DD × 0.75
V_DD
V
3
Logic LOW Transmitter Input Voltage (TxD)
Logic HIGH Receiver Input Irradiance
V_ILTXD
E_IH
0.0
V_DD × 0.2 V
4
9.0
µW/cm² 5, 6
Receiver Signal Rate
BR
2.4
115.2 kbit/s
Operating Temperature
T_OPR
-25
+85
°C
7
NOTES
1. Shutdown mode
2. Normal mode
3. LED ON
4. LED OFF
5. Bit rate = 2.4 kbit/s ~ 115 kbit/s (in-band signals)
6. An in-band optical signal is a pulse/sequence where the peak wavelength, λ_P,
is defined as 850 nm ≤ λ_P ≤ 900 nm, and the pulse characteristics are compliant
with the IrDA Serial Infrared Physical Layer Link Specifications.
7. 25°C (TYP.)
IrDA Technical Information
3