GP2A25 Datasheet, PDF (3/3 Pages) Sharp Electrionic Components – Light Modulation, Reflection Type Photointerrupter

GP2A25
Fig. 1 Low Level Output Current vs.
Ambient Temperature
60
50
40
Fig. 2 Low Level Output voltage vs.
Ambient Temperature
0.3
VCC=5V
At detecting time
IOL= 30mA
0.2
30
16mA
27
20
0.1
10
5mA
0
- 10 0
25
50 60
75
Ambient temperature Ta (˚C)
Fig. 3 Low Level Output Voltage vs.
Low Level Output Current
0.5
0.4 ^VCC=5V
At detecting time
0.3
0.2
0.1
0.05
0.04
0.03
0.02
0
- 10 0
25
50 60 75
Ambient temperature Ta (˚C)
Fig. 4 Dissipation current (Smoothing Value)
vs. Ambient Temperature
7
6
5
Ta=- 10˚C
25˚C
4
60˚C
3
2
1
0.01
1
2 3 4 5 10 20 30 4050 100
Low level output current I OL (mA)
0
4.75
5.0
5.25
Supply voltage VCC (V)
(Precautions for Use)
1) In order to stabilize power supply line, connect a by-pass capacitor of more than 0.33µ F between VCC and GND near the device.
2) Please do not perform dip cleaning or ultrasonic cleaning because lens part of this product is an optical device of acrylic resin.
3) Remove dust or stains, using an air blower or a soft cloth moistened in cleaning agent.
However, do not perform the above cleaning using a soft cloth with cleaning solvent in the marking portion.
In this case, use only the following type of cleaning solvent used for wiping off:
Ethyl alcohol, Methyl alcohol, Isopropyl alcohol
When the cleaning solvents except for specified materials are used, please contact us.
q As for other general precautions, refer to the chapter "Precautions for Use".