GP1UE261RKVF Datasheet, PDF (3/6 Pages) Sharp Electrionic Components – Low Voltage Operation,Anti Electromagnetic

Internal Block Diagram
GP1UE26RK0VF/GP1UE27RK0VF Series
GP1UE28RK0VF/GP1UE28QK0VF Series
R_L
Limiter
B.P.F. Demodulator Integrator Comparator
V_OUT
V_CC
GND
Absolute Maximum Ratings
(Ta=25
Parameter
Symbol Rating Unit
Supply voltage
V _CC
0 to +6.0 V
*1 _{Operating temperature Topr}
-10 to +70
Storage temperature
T_stg
-20 to +70
*2 _{Soldering temperature Tsol}
265
*1 No dew condensation is allowed
*2 For 6s (At mounting on PCB with thickness of 1.6mm)
Recommended Operating Conditions
Parameter
Symbol Operating conditions Unit
Supply voltage
V _CC
2.7 to 5.5
V
Electro-optical Characteristics
(Ta=25, V CC=3V)
Parameter
Symbol
Conditions
MIN. TYP. MAX. Unit
Dissipation current
High level output voltage
Low level output voltage
High level pulse width
Low level pulse width
B.P.F. center frequency
Output pull-up resistance
I CC
No input light
0.27 0.4 mA
V OH
*3
VCC-0.5
V
V OL
*3 _IOL=1.6mA
0.45 V
T1
*3
600
1200 s
T2
*3
400
1000 s
f0
*4
kHz
RL
70 100 130 k
*3 The burst wave as shown in the following figure shall be transmitted by the transmitter shown in Fig. 1
The carrier frequency of the transmitter, however, shall be same as *4, and measurement shall be from just after starting the transmission until 50 pulse
*4 The B.P.F. center frequency f0 varies with model, as shown in Model Line-up
Burst wave
s
1000s
f0=( *4 )
Duty 50%
Sheet No.: OP06006
3