GP1FAV30RK0F Datasheet, PDF (3/9 Pages) Sharp Electrionic Components – Fiber Optic Receiver Square connector With mounting hole Protection cap type

GP1FAV30RK0F
■Absolute Maximum Ratings
Parameter
Symbol
Rating
Unit
Remark
Supply voltage
Operating temperature
Storage temperature
V_CC
-0.5 to +7.0
V
T_opr
-20 to +70 °C
T_stg
-30 to +80 °C
260
°C 6 s or less/time up to 2 times.
Soldering temperature *1
T_sol
4 s or less/time up to 1 time.
380
°C _{Soldering by hand at each terminal. *2}
Output current
I_oH
2
mA Source current
I_oL
10
mA Sink current
*1 Solder at a position more than 1.6 mm away from the base of the lead terminal. Reflow is not available.
*2 Do not contact top of soldering iron to lead terminal directly.
■Recommended Operating Conditions
Parameter
Symbol MIN. TYP. MAX. Unit
Remark
Supply voltage
Operating transfer rate
V_CC
2.7
3.0
3.6
V
T
0.1
-
15.5 Mb/s Notes (1), (2)
Receiver input optical power level P_C -24.0
-
-14.5 dBm Peak optical output
Notes
(1) This operating transfer rate shall be a specification when NRZ, duty 50 % of continuous “0101···” signal is transferred.
(2) The output (H/L Level) of this product are not fixed constantly when it receivers the modulating light
(including DC light, no input light) less than 0.1 Mb/s.
■Electro-optical Characteristics
(Ta = 25 °C, V CC = 3V)
Parameter
Peak sensitivity wavelength
Supply current
High level output voltage
Low level output voltage
Rise time
Fall time
L ^→ H delay time
H ^→ L delay time
Pulse width distortion
Jitter
Symbol
λ_p
I_CC
V_oH
Vo_L
t_r
t_f
t_pLH
t_pHL
Δt_w
Δt_j
Conditions
Measurement method refer to Fig. 1
Measurement method refer to Fig. 2, 3
Measurement method refer to Fig. 4, 5,
PC = -14.5 dBm
Measurement method refer to Fig. 4, 5,
PC = -24 dBm
MIN.
-
-
2.1
-
-
-
-
-
-20
-
-
TYP.
700
13
-
-
15
8
-
-
-
1
-
MAX. Unit
- nm
15 mA
-
V
0.5 V
-
ns
-
ns
180 ns
180 ns
+20 ns
20 ns
20 ns
Sheet No.: E2-A01101EN
3