GP1F361T Datasheet, PDF (3/7 Pages) Sharp Electrionic Components – Optical Mini-Jack for Digital Audio Equipment

GP1F361T/GP1F361R
GP1F361R ( Photoelectric conversion element )
Parameter
Peak sensitivity
wavelength
Supply current
High level output voltage
Low level output voltage
Rise time
Fall time
Low→High delay time
High→Low delay time
Pulse width distortion
Jitter
PC= - 14.5dBm
PC= - 24dBm
Symbol
λP
ICC
VOH
VOL
tr
tf
t PLH
t PHL
∆ tw
∆ tj
Conditions
-
Refer to Fig. 4
Refer to Fig. 5
Refer to Fig. 5
Refer to Fig. 5
Refer to Fig. 5
Refer to Fig. 5
Refer to Fig. 5
Refer to Fig. 5
Refer to Fig. 6
MIN.
-
-
2.1
-
-
-
-
-
- 30
-
-
TYP.
700
12
-
-
17
5
-
-
-
1
-
(Ta = 25˚C)
MAX. Unit
-
nm
15
mA
-
V
0.4
V
30
ns
30
ns
180
ns
180
ns
+ 30
ns
30
ns
30
ns
s Mechanical and Electrical Characteristics
GP1F361T/GP1F361R (Jack )
Parameter
Insertion force,
Withdrawal force
Symbol
FP
Conditions
∗2
MIN. TYP. MAX. Unit
5
-
35
N
Contact resistance
Rcon
∗3
-
-
30
mΩ
Isolation resistance
RISO
D.C. 500V,
1min.
100
-
-
MΩ
Note ) This jack is designed for appliacable to φ 3.5 compact single head plug (EIAJ RC-6701A) .
∗2 Measuring method of insertion force and withdrawal force.
Insertion and withdrawal force shall be measured after inserting and withdrawing 3 times by using EIAJ RC-6701A standard
plug for test.
∗3 Measuring method of contact resistance.
About movable contact terminal and make contacts, it measures at 100mA or less and 1000HZ at the condition of inserting
EIAJ 6701A standard plug for test.
Fig. 1 Measuring Method Optical Output Coupling Fiber
GP1F361T Unit
to be measured
Standard optical fiber cable
Vin V_CC GND
V_CC
D
Optical power
meter
(Anritsu ) ML93B
The optical power meter
must be calibrated to
have the wavelength
sensitivity of 660nm.
(0dB = 1mW)
Note ) ( 1) VCC ; 3.0V ± 0.05V (State of operating)
( 2) To bundle up the standard fiber optic cable, make it into a loop with the diameter D= 10cm or more.
( The standard fiber optic cable will be specified elsewhere).