PC3H4A Datasheet, PDF (2/14 Pages) Sharp Electrionic Components – DEVICE SPECIFICATION FOR PHOTOCOUPLER

SHARP CORPORATION
ED-96027A
1 September 30, 1998
MODEL No.
PAGE
PC3H4
l/11
1. Application
This specification applies to the outline and characteristics
Model No. PC3H4.
of photocoupler;
2. Outline
Refer to the attached drawing No. CY8374KO2.
3. Ratings and characteristics
Refer to the attached sheet, page 4 to 6.
4. Reliability
Refer to the attached sheet, page 7.
5. Incoming inspection
Refer to the attached sheet, page 8.
6. Supplement
6.1 Isolation voltage shaI.I be measured in the following method.
(1) Short between anode and cathode on the primary side and between
collector and emitter on the secondary side.
(2) The dielectric withstand tester with zero-cross circuit shall be used.
(3) The wave form of applied voltage shah be a sine wave.
6.2 Packaging spectications
Refer to the attached sheet, page 9 to 11.