GP2W2001YK Datasheet, PDF (2/12 Pages) Sharp Electrionic Components – IrDA Control Infrared Transceiver for Peripheral Type 1

ELECTRONIC COMPONENTS
SHARP IrDA Control Infrared Transceiver
Record of Modification and Revision
Version
0.9
0.92
0.95
0.96
1.0
1.1
1.1.1
Issue Date
October 17th, 1997
February 23rd, 1998
March 31st, 1998
April 1st, 1998
August 25th, 1998
November 6th, 1998
November 26th, 1998
Comments
First Edition
Outline Dimensions Modified
Name of compliant standard changed to “IrDA Control”
Compliant Specification is limited to “IrDA Control Peripheral Type 1”.
Outline Dimension Modified (Eliminate Shield of Front).
Outline Dimension and Absolute Maximum Rating Modified
Outline Dimension and Recommended Circuit Modified
Recommended Operating Conditions Modified
(Preliminary Information Disclaimer)
This document includes a “Preliminary Information” of Sharp IrDA Control Infrared Transceiver (for IrDA Control
Peripheral Type 1). Any of information under this document, such as Specifications and outline dimensions, are
applicable only for reference purpose, and Sharp hold all rights to change or alter prices at any time without notice.
In absence of confirmation by device Specification Sheets, SHARP takes no responsibility for any defects that occur in
equipment using any of SHARP’s device, shown in catalogues, data books, Preliminary Information, etc. Contact
SHARP, or SHARP local representatives in order to obtain the latest version of the device Specification Sheets before
using any SHARP’s devices.
SHARP Electronic Components
2
Rev. 1.1.1 November 26, ‘98