GP2W1001YP0F Datasheet, PDF (13/14 Pages) Sharp Electrionic Components – IrDA Compliant Transceiver Module 9.6 kb/s to 4 Mb/s (FIR) Low Profile Low Consumption Current

GP2W1001YP0F
●Cleaning Instructions
Solvent cleaning :
Solvent temperature 45℃ or less, Immersion for 3 min or less
Ultrasonic cleaning :
The effect to device by ultrasonic cleaning differs by cleaning bath size, ultrasonic power output,
cleaning time, PCB size or device mounting condition etc.
Please test it in actual using condition and confirm that doesn't occur any defect before starting
the ultrasonic cleaning. The cleaning shall be carried out with solvent below.
Recommended Solvent materials :
Ethyl alcohol, Methyl alcohol, Isopropyl alcohol
●Presence of ODC etc.
This product shall not contain the following materials.
And they are not used in the production process for this product.
Regulation substances : CFCs, Halon, Carbon tetrachloride, 1.1.1-Trichloroethane (Methylchloroform)
Specific brominated flame retardants such as the PBB and PBDE are not used in this product at all.
• The RoHS directive (2002/95/EC)
This product complies with the RoHS directive (2002/95/EC).
Object substances: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) and
polybrominated diphenyl ethers (PBDE)
• Content of six substances specified in “ Management Methods for Control of Pollution Caused by Electronic
Information Products Regulation ” (Chinese : 电子信息产品污染控制管理办法)
Toxic and hazardous substances
Category
Hexavalent Polybrominated Polybrominated
Lead Mercury Cadmium
chromium biphenyls diphenyl ethers
(Pb) (Hg)
(Cd) _(Cr6+)
(PBB)
(PBDE)
Infrared data
✓✓
✓
✓
✓
✓
communication device
✓: indicates that the content of the toxic and hazardous substance in all the homogeneous materials of the part
is below the concentration limit requirement as described in SJ/T 11363-2006 standard.
Sheet No.: E3-A00102EN
13