GP1S58VJ000F Datasheet, PDF (11/12 Pages) Sharp Electrionic Components – Gap : 5mm, Slit : 0.5mm Phototransistor Output, Case package Transmissive Photointerrupter

■ Package specification
● Case package
Package materials
Anti-static plastic bag : Polyethtylene
Moltopren : Urethane
Partition : Corrugated fiberboard
Packing case : Corrugated fiberboard
GP1S58VJ000F
Package method
100 pcs of products shall be packaged in a plastic bag, Ends shall be fixed be by stoppers. The bottom
ot the packing case is covered with moltopren, and the partition is set in the packing case. Each partition
should have 1 plastic bag.
The 10 plastic bags containing a product are put in the packing case.
Moltopren should be located after all product are settled (1 packing contains 1 000 pcs).
Packing composition
Partition
Anti-static
plastic bag
Moltopren
Packing case
Sheet No.: D2-A02702EN
11