GP1A05AJ000F Datasheet, PDF (11/12 Pages) Sharp Electrionic Components – Gap : 5mm, Slit : 0.5mm OPIC Output Transmissive Photointerrupter with Connector

■ Package specification
● Case package
Package materials
Anti-static plastic bag : Polyethtylene
Moltopren : Urethane
Partition : Corrugated fiberboard
Packing case : Corrugated fiberboard
GP1A05AJ000F Series
Package method
75 pcs of products shall be packaged in a plastic bag, Ends shall be sealed by stapler. The bottom ot the
packing case is covered with moltopren, and the partition is set in the packing case. Each partition should
have 1 plastic bag.
Moltopren should be located after all product are settled (1 packing conteains 150 pcs).
Packing composition
Moltopren
Plastic bag
Packing case
Sheet No.: D3-A04501EN
11