S12ME1 Datasheet, PDF (1/5 Pages) Sharp Electrionic Components – European Safety Standard Approved, Long Creepage Distance Type Photothyristor Coupler

S12ME1/S12ME1F
S12ME1/S12ME1F
European Safety Standard Approved,
Long Creepage Distance Type
Photothyristor Coupler
g Lead forming type (I type ) and taping reel type (P type) of S12ME1/S12ME1F are also available. (S12ME1I/S12ME1FI,S12ME1P/S12ME1FP)
g DIN-VDE0884 approved type is also available as an option.
s Features
s Outline Dimensions
( Unit : mm)
1. Internal insulation distance : 0.4mm or more
2. Creepage distance : 8mm or more
Space distance : 5mm or more (S12ME1 )
8mm or more (S12ME1F)
3. Recognized by UL file No. E64380
Approved by BSI (BS415 : NO.7088, BS7002 : NO.7410)
S12ME1
2.54^{± 0.25}
654
S12ME1
Internal connection
diagram
65 4
s Applications
1. ON-OFF operation for low power load
2. For triggering medium or high power thyristor and triac
3. Over voltage detection of switching power supplies
12
Anode
mark
9.22^{± 0.5}
3
1.2^{± 0.3}
1 23
7.62^{± 0.3}
1 Anode
2 Cathode
3 NC
4 Cathode
5 Anode
6 Gate
0.5^{± 0.1}
0.26^{± 0.1}
θ : 0 to 13˚ ^θ
S12ME1F
2.54^{± 0.25}
654
Internal connection
diagram
65 4
S12ME1
12
Anode
mark
9.22^{± 0.5}
3
1.2^{± 0.3}
1 23
7.62^±0.3
1 Anode
2 Cathode
3 NC
4 Cathode
5 Anode
6 Gate
0.5^{± 0.1}
0.26^{± 0.1}
10.16^{± 0.5}
“ In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that occur in equipment using any of SHARP's devices, shown in catalogs,
data books, etc. Contact SHARP in order to obtain the latest version of the device specification sheets before using any SHARP's device.”