S12MD1V Datasheet, PDF (1/5 Pages) Sharp Electrionic Components – Photothyristor Coupler

S12MD1V/S12MD3
S12MD1V/S12MD3
Photothyristor Coupler
g Lead forming type ( I type) and taping reel type ( P type) of S12MD1V are also available. ( S12MD1VI/S12MDIP )
s Features
1. High RMS ON-state current ( IT : MAX.
200mA rms )
2. High repetitive peak OFF-state voltage
( V_DRM : MIN. 400V )
3. Trigger current I FT : MAX. 15mA at R G =
20kΩ
4. For half-wave control ••• S12MD1V
For full-wave control ••• S12MD3
5. Recognized by UL, file No. E64380
g S12MD1V and S12MD3 are for 100V line
s Outline Dimensions
(Unit : mm)
S12MD1V
2.54^{± 0.25}
654
Internal connection diagram
654
S12MD1V
12
Anode
mark
7.12^{± 0.5}
3
0.9^{± 0.2}
1.2^{± 0.3}
123
7.62^{± 0.3}
1 Anode
2 Cathode
3 NC
4 Cathode
5 Anode
6 Gate
s Applications
1. ON-OFF operation for a low power load
2. For triggering high power thyristor and
triac
S12MD3
2.54^{± 0.25}
87
0.5^{± 0.1}
0.26^{± 0.1}
θ : 0 to 13 ˚ θ
0.8^{± 0.2} _{Internal connection diagram}
65
8 76 5
S12MD3
Anode
mark
1 2 34
1.2^±0.3
0.85^{± 0.3}
9.22^±0.5
1 23 4
7.62^{± 0.3}
1 4 Anode
2 3 Cathode
5 8 Gate
6 7 Anode/
cathode
0.5^±0.1
0.26 ^{± 0.1}
θ : 0 to 13˚ θ
“ In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that occur in equipment using any of SHARP's devices, shown in catalogs,
data books, etc. Contact SHARP in order to obtain the latest version of the device specification sheets before using any SHARP's device.”