S11MD4V Datasheet, PDF (1/4 Pages) Sharp Electrionic Components – Phototriac Coupler with Built-in Zero-cross Circuit

S11MD4V/S11MD4T
S11MD4V/S11MD4T
Phototriac Coupler with
Built-in Zero-cross Circuit
s Features
1. Pin No. 5 completely molded for external
noise resistance (S11MD4T)
2. Dual-in-line package type (S11MD4V)
3. Built-in zero-cross circuit
4. High repetitive peak OFF-state voltage
(V_DRM : MIN. 400V )
5. Isolation voltage between input and output
Viso : 5 000Vrms (S11MD4V/S11MD4T )
6. Recognized by UL, file No.E64380
g S11MD4V and S11MD4T are for 100V
lines.
s Applications
1. For triggering medium/high power triacs
s Absolute Maximum Ratings
( Ta = 25˚C)
Parameter
Forward current
Input
Reverse voltage
RMS ON-state
current
Output
∗1_{Peak one cycle}
surge current
Repetitive peak
OFF-state voltage
*2 _{Isolation voltage}
Operating temperature
Storage temperature
∗3_{Soldering temperature}
Rating
Symbol
Unit
S11MD4V/S11MD4T
IF
50
mA
VR
6
V
IT
0.1
Arms
Isurge
1.2
A
VDRM
400
V
Viso
5 000
Vrms
Topr - 30 to +100
˚C
Tstg - 55 to +125
˚C
Tsol
260
˚C
s Outline Dimensions
(Unit : mm)
S11MD4V
2.54^{± 0.25}
654
S11MD4V
Internal connection
diagram
654
Zero-cross
circuit
12
Anode
mark
7.12^{± 0.5}
3
0.9^{± 0.2}
1.2^±0.3
0.5^{± 0.1}
1 23
7.62^{± 0.3}
0.26^{± 0.1}
θ
θ : 0 to 13 ˚
1 Anode
2 Cathode
3 NC
4 Anode/
Cathode
5 No exter-
nal con-
nection
6 Anode/
Cathode
S11MD4T
6
4
S11MD4T
Internal connection
diagram
6
4
Zero-cross
circuit
Anode
12
mark
2.54^±0.25
7.12^±0.5
3
0.9^±0.2
1.2^±0.3
1 23
7.62 ^{± 0.3}
1 Anode
2 Cathode
3 NC
4 Anode/
Cathode
6 Anode/
Cathode
0.5^{± 0.1}
0.26^{± 0.1}
θ : 0 to 13 ˚ θ
∗1 50Hz sine wave
∗2 40 to 60% RH, AC for 1 minute,
f = 60Hz
∗3 For 10 seconds
“ In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that occur in equipment using any of SHARP's devices, shown in catalogs,
data books, etc. Contact SHARP in order to obtain the latest version of the device specification sheets before using any SHARP's device.”